日本安立计器|ANRITSU| 定购注意事项

Standard Anritsu Meter products are designed to use Type-K or Type-E thermocouples.
Note that the main thermometer unit must be connected to a probe of the designated type for accurate temperature measurements.
Anritsu Meter can also manufacture certain models for use with Type-J or Type-T thermocouples. Please contact us for more information.
安立计器的各种产品的接头分别备有ASP ANP标准型插头。
但是请注意，测量本体温度感应器的插头形状不同时将不能使用
此外，有几种产品还可以制J,T型号的热电偶，具体情况请向我公司询问。

Standard Anritsu Meter products are designed to use either the ASP or ANP plug.
Note that the main thermometer unit and probe must have the same connector types.
Anritsu Meter can also manufacture certain probe models with the following connector types. Please contact us for more information.
安立计器的各种产品的接头分别备有ASP,ANP两种标准插头

*WA, WC, and WT are made of generaliy available electrical materials.
Note that temperature changes in these parts may result in measurement errors.
WA,WC,WT,使用的是一般电器用材。
这部分如果发生温度变化会有测试误差出现，请注意.

For information on standard probe compensating lead wires (cords), please refer to the probe product pages.
Anritsu Meter can also manufacture certain probe models with the following compensating lead wires. Please contact us for more information.
有关感应器的补偿导线（连线）在各个感应器的说明页中有标准型连线的介绍。
此外有几种温度感应器的补偿导线可以特制下表所示型号号，具体情况向我公司询问.

Type : K

Model 型号	Outer diameter Conductor 外部直径	Sheath Material 保护材料	Heat Resistant 最高耐温	Resistance 电阻	Feature 特征
TS-K	φ2.3mm 7 / 0.1 × 2	Silicone rubber 硅树脂橡校	240°C	18Ω / m	Thin, Flexible
TF-K	φ2.3mm 7 / 0.1 × 2	Teflon 特氟纶	230°C	19Ω / m	Resistant to chemicals
TC-K	φ4.0mm 14 / 0.1 × 2	Silicone rubber 硅树脂橡校	240°C	9Ω / m	Flexible
TCG-K	φ4.5mm 14 / 0.1 × 2	Silicone rubber with Stainless steel不锈钢网和硅树脂橡校保护	240°C	9Ω / m	Flexible, Resistant to external damage
GW-K	φ2.3mm 0.32 × 2	Glass fiber 玻璃纤维	300°C	11Ω / m	Highly resistant to heat
SG-K	φ3.0mm 0.65 × 2	Glass fiber with Stainless steel 不锈钢网和玻璃纤维保护	400°C	3Ω / m	Moderate hardness Highly resistant to heat Resistant to external damage
TPC-K	φ3.3mm 14 / 0.1 × 2	Polyurethane 聚亚安酯	110°C	18Ω / m	Coiled cord Contraction / extension range : 0.3 to 1.5m

Type : E

Model 型号	Outer diameter Conductor 外部直径	Sheath Material 保护材料	Heat Resistant 最高耐温	Resistance 电阻	Feature 特征
TS-E	φ2.3mm 7 / 0.1 × 2	Silicone rubber 硅树脂橡校	240°C	22Ω / m	Thin, Flexible
TF-E	φ2.3mm 7 / 0.1 × 2	Teflon 特氟纶	230°C	22Ω / m	Resistant to chemicals
TC-E	φ4.0mm 14 / 0.1 × 2	Silicone rubber 硅树脂橡校	240°C	11Ω / m	Flexible
TCG-E	φ4.5mm 14 / 0.1 × 2	Silicone rubber with Stainless steel 不锈钢网和硅树脂橡校保护	240°C	11Ω / m	Flexible, Resistant to external damage
GW-K	φ2.3mm 0.32 × 2	Glass fiber 玻璃纤维	300°C	14Ω / m	Highly resistant to heat
SG-E	φ3.0mm 0.65 × 2	Glass fiber with Stainless steel 不锈钢网和玻璃纤维保护	400°C	3.6Ω / m	Moderate hardness Highly resistant to heat Resistant to external damage
TPC-E	φ3.3mm 14 / 0.1 × 2	Polyurethane 聚亚安酯	110°C	22Ω / m	Coiled cord Contraction / extension range : 0.3 to 1.5m

*[14.0 × 2] in the conductor column indicates that the cord contains two conductor wires (one pair).
Each conductor wire is a twisted wire composed of 14 0.1-mm-diameter wire strands.
芯线栏中的[14/0.1X2]表示芯线是由14条φ0.1铜线捻成（一对）组成.

Type 类型	Former Symbol 原型号	Composing materials 材质
K	CA	(+) : Chromel (-) : Alumel
E	CRC	(+) : Chromel (-) : Constantan
J	IC	(+) : Iron (-) : Constantan
T	CC	(+) : Copper (-) : Constantan
R	(PR)	(+) : Platinum / 13% Rhodium (-) : Pure Platinum